Need a flooring primer!

midiguit

8 years ago

Can you explain the pros and cons of hardwood floors vs engineered hardwood floors?

Sort by:Oldest

Comments (2)

PRO
Driftmier Design LLC
8 years ago
Traditional hardwood floors are solid 3/4" thick boards, generally not wider than 3" to prevent warping. They come 2 ways--site finished or pre-finished. A site finished floor is laid raw, stained (or left natural), sanded in place, and finished with several layers of polyurethane or other clear coating in your choice of gloss level. Pre-finished hardwood comes stained, sealed, and ready to install from a factory, with an aluminum oxide or other wear layer for protection and durability.

Engineered wood is a real wood veneer on top of a plywood substrate. Higher end engineered wood generally has a thicker veneer. The plywood is more stable than solid hardwood, so you you will be able to choose larger plank sizes with an engineered wood. Also comes pre-finished from a factory with a wear layer for protection. Since they are not sanded on site, factory finished hardwood and engineered wood planks have a micro-bevel edge to counteract any slight unevenness in the floor during installation.

A site finished wood floor seals joints between the boards, but with all wood floors, those joints will move slightly with change in seasons. Some wood species are harder than others but all wood floors can scratch or dent from pets, unprotected furniture legs, etc.

I hope that helps!
PRO
Cancork Floor Inc.
8 years ago
A site finished floor, in my mind, is the most desireable wood floor. It is the classic looking hardwood that is smooth and flat. The down side is the amount of time it takes to site finish and "cure". The work is a few days...the "cure" (the time the finish takes to harden = allowes you to move in) can be 1-5 weeks (depending on the finish).

A factory finished floor (either solid or engineered) is a floor that is "ready to go". It is installed and you move in right away. These floors have tough finishes...but not everyone is in love with the look of factory finished hardwood. It is a small percentage of us who know/care...but it is enough to mention.

Your living situation, where in the world you live, your 'timing' and your ability to wait for a floor to cure will all add up to a personalized approach to hardwood floors. Each person is different. Each as their own needs. Each house has a "need" which makes one floor "better" than the other. You have to add up all of your personal "needs", your house's "needs" and see which hardwood works best for you.
Related Discussions
Bubbles formed after applying primer
Q
Comments (5)
There is a product called Peel Stop which is really good, you can buy it in Homebase. I recently was painting a wall and one wall kept crazing (it's called alligatoring) and there were also some bubbles. Some sites recommended scraping all of the paint off but I thought I would try this product as it had good reviews. I painted it all over the wall and after it dried I repainted. Unfortunately, some of the crazing came back so I re-applied and then applied primer (Rustins water based). I repainted again and this time no problems. The usual reason things like this happen is the wall is not properly prepared or, it can be when you paint a matt paint over a silk one. F&B is very matt and chalky so this probably happens a lot. Hope this helps and you get it sorted.
...See More
What primer for F&B Hague Blue?
Q
Comments (10)
Hi Sarah, I don't think it needs a primer if you're using the light colours or painting a light colour over a light wall in my personal opinion. -It's a preference, completely up to you. If you're painting a dark colour over a light or recently plastered wall however, the dark tones primer is definitely is worth using in my experience :) Hope that's helpful.
...See More
What is the best internal primer?
Q
Comments (0)
Just moved house and have some extra special wall paper that I need to remove 😂 I'm intending to remove the paper with a steamer, let it dry out and then prime the walls - but what with? There are so many terrible products out there so would appreciate some recommendations!
...See More
Need a bathroom and utility room on ground floor
Q
Comments (2)
Sorry you are right the measurements for the current kitchen is 3.23mx2.4m (10'7"x7'10") I plan to convert it into a bathroom but will a kitchen fit in a 6 meter extention?
...See More

Need a flooring primer!

Comments (2)

Driftmier Design LLC

Cancork Floor Inc.

Related Discussions

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US