Fed up of my glass splashback
Jodene Young
8 years ago
Featured Answer
Sort by:Oldest
Comments (7)
chunkysox
8 years agoRelated Discussions
Advise on kitchen splashback / tiles please
Comments (28)Pity you have decided against glass in favour of tiles. We have just done our kitchen and I wanted an easy-to-clean surface for the splash back, so the rough surface of grouting around tiles, and also the indentations on some patterned tiles (which collect grease and grime) ruled them out for me! I went for glass, which the manufacturers matched exactly to the duck egg paint colour on the other walls (just gave them a product code of the paint), and although the initial outlay for the glass was expensive, the surface is so brilliant to keep clean and it looks fab as well. I would definitely recommend, and you could match it to, say, your lovely pink/purple ceiling lights ......See MoreHelp choose splashbacks, island lighting, island chairs
Comments (9)Hi Sheron, Kitchen is looking great - is it just just behind the hob you were looking to do? Couple of ideas: 1) could get a piece of clear glass cut to suit and screw in place (with rubber grommets to protect glass) - you can then use it like a picture frame and put photos/maps/postcards etc behind it - and change whenever you want 2) I'm still stalling on what to do with our hob splash back, so I've painted that section of the wall in matching paint, but in an eggshell finish. This means it's wipe-down and keeps the room quite minimal whilst I decide - but I might keep it this way! 3) tiles always look great and are very durable - I'd always recommend getting lots of samples before committing to any of them though 4) you could get a slab of the same worktop material to run up the wall? Re: the stools - whilst not very modern looking, they look fairly robust and reliable - so you could always investigate keeping these and painting these in your chosen feature colour?...See Morehelp me wrap up my kitchen, new inspiration...
Comments (17)The wood effect tiles tend to only come in quite large sizes, saying that, it might do the trick. I'm going for a smoked limed oak LVT flooring through a very large portion of the house which butts up to the kitchen doorway, so I'm not sure if I could see that sort of amount of wood effect going well. I could get a hold of some more blonde/warm samples but I'm guessing what HIS answer will be already although its certainly worth a look. Perhaps Cornish driftwood? http://www.toppstiles.co.uk/tprod45453/cornish-driftwood-dark-tile.html ... but we are back to the problem of finding sensible sized tiles as wood effect is generally only made suitable for floors... The herringbone is a glossy tile, but also textured ripped and pitted, it is however £333/square metre so oven splash maybe but not as a main on both the kitchen and laundry! I'm operating on a budget of £600 to £1000 for tiles supply only, plus trims, adhesive, etc. If I tile regular splashback heights, its square metres, plus nearly another metre behind the oven up to the extractor. I hear what youre saying about being careful not to detract from the lights. As we see the window directly from where we sit in the living room, we found we quite like that the wires disappear into the black background so the globes kind of float there. Thats mainly why I liked the marbled effect paper rather than a strong pattern or light colour there. / Here is a better view of the Terra pearl that I am waiting on (less than £50/m), and as you can see, youre all spot on that I'm looking for texture / a more tactile finish. The thought is that it may go very well as the main splash, tying in with the light strip in the floor as well as putting a bit more light into the room I was dead set on the metallic steel linear mosaic for some time, below is the copper version nobody seems to have a sample of, However, once the granite went in, the screen printed effect on the tiles look absolutely awful Painting the wall the same colour of the cupboards.... I actually painted the laundry a similar colour, although I know its a bit more vibrant than the cupboards (totally teal) I think I'll find it a but much...See MorePerk up my kitchen please
Comments (28)Thanks everyone. I think I've decided to change the splashback for a white marble one. I will put it only on the section below the extractor fan to the full height (so it's 1200mm x 910mm) then paint the walls either side down to an upstand to match the worktop. I can't afford to put up more cabinets on the walls on either side. If I were to put shelves either side of the new splashback, what height and length? Or just some shelves to the left..........See MoreAluSplash
5 years agoTani H-S
5 years agoJonathan
5 years agorinked
5 years ago
Sort Our Stuff