skip to main content

Flooring Kitchens

Engineered wood flooring - are Furlong and Elgin good brands?

3 years ago

I am choosing engineered wood flooring for our kitchen and will have under floor heating. I’ve done my research into grade, thickness, wear layer etc but would like to know if Furlong and Elgin brands are good? They seem well priced for a good spec so am dubious! (Am not interested in LVT or porcelain tiles)

Sort by:Oldest

Comments (2)

Daisy England
3 years ago
last modified: 3 years ago
Can’t help with either of the above brands but look at Naturally Oak. Lots of colour matches and really good.

https://www.naturallyoak.co.uk/
annamooanna
Original Author
3 years ago
Thank you Daisy. The brands I am looking at are more around £45 to £50 per sqm which comes in cheaper than Naturally Oak - trying to work out why they are cheaper when spec is similar.
Related Discussions
Another hardwood vs engineered wood flooring question!
Q
Comments (17)
I'll agree with ProSource Memphis, you need to install an engineered wood floor because of the concrete. For our customers that are in your exact situation we offer engineered products, prefinished and unfinished (site sanded/finished), that have 3-5 mm wear layers. Some of these products can withstand 2-4 sandings, which equals way more lifespan than a cheap engineered floor. This equals less cost in the long run, but higher cost up front. Basically the thicker the wear layer, the better chance your engineered floor will last longer (80 years + estimated for 4-5mm), and the more expensive it will be. ProSource is correct, gluing a 3/4" solid floor down can be problematic and not worth the risk. Especially when there are high quality engineered floors that offer essentially the same thing. Engineered is going to be more stable with your fluctuating climate as well. You'll want a hygrometer in the home to monitor relative humidity. It should be somewhere around 30-60% RH for the floor to play nice. There are so many more variables involved in this discussion that entire books can probably be written. But that's my $.02
...See More
Wood Effect Porcelain tiles? Or Wood flooring?
Q
Comments (16)
This is a question i get asked all the time. We sell miles of Wood Effect Porcelain Tiles for anything from a small cloakroom floor to huge living spaces. Like someone said Porcelain is Cold to touch where as the real thing, not as much. Most of the Builds we supply it to are installing Water underfloor heating throughout the areas its being fixed to so you avoid this problem. With the phenomenal technology being used to create these tiles they are now available in Lengths of up to 1700, they are looking more and more authentic. With hundreds of factories around the globe all giving it their best shot there really are some true stunners that not only fool the eye but the touch too. The positives of Porcelain really outweigh the negatives, no warping, no swelling, no staining or scratching. We once had a customer that replaced her traditional wood with porcelain because it was so much easy to look after and she didn't need to worry about her cleaner using the wrong product and staining it. Be careful with Amtico as they are not all UV protected and can fade. Take a look at our http://www.houzz.co.uk/projects/2107824/wood-effect-tiles-dolphin-wood for just a small insight into how Porcelain effect tiles can really transform any area of the home. Hope this helps.
...See More
luxury vinyl Vs engineered wood???
Q
Comments (3)
You can get very good fake laminate now but personally I don't think it ever looks or feel as good as real wood. With engineered wood there's lots of upsides, the main ones being they can go over underfloor heating and have very little movement or warping with changes in temperature (unlike solid wood planks). The range and choices can be very confusing however. When I was picking ours for upstairs I had a very helpful local flooring specialist explain it to me so I'll try and detail it for you too should you choose to go down this route! The wear layer is the thickness of real wood on the top of the substrate of laminated cheaper wood. Cheaper options have 2-3mm wear layers, whilst others (usually more expensive) have 4-7mm. The advantage of thicker layers is of course the number of times you can have the floors sanded and re-finished. Realistically a thicker 6mm layer should last at least a 100 years and numerous sandings (it would be very easy to accidentally go through a 2mm top layer accidentally if sanding). Finish options tend to be lacquer/varnish or oil. Lacquer/varnish sits on the surface of the wood, it is harder wearing than oil but will scratch and in order to re-finish you have to sand everything back. Oil absorbs into the wood and is usually applied in several coats to build up protection. If you scratch it, or a busy area gets worn you can lightly sand it and just re-apply oil to that individual area. You can also buy unfinished engineered boards meaning you can stain and oil/varnish it yourself however you like but of course means much more work. Both lacquer and oil come in the usual range of gloss, semi gloss, satin and matt. Matt is popular now as it looks the most natural and changes the look of the wood the least. Colours - you can get a myriad of colours from two main finishes - stained or smoked. Stain is only absorbed in the top layers of wood so if you scratch it deeply the natural wood colour will show through. Same goes if you sand and re-finish it. Smoking is a slow process but basically the smoke gets all the way into the wood. This means even if you sand or scratch it the colour shouldn't change. You can get 'semi smoked' which just means its been left to smoke for less time resulting in a lighter finish. You can get 'brushed' finishes which is where the boards are literally brushed with stiff bristles that remove the softer wood grains resulting in a more textured feel. Similarly 'hand scraped' gives a soft undulation to the surface as if 'scraped' by hand tools as very old floorboards were. Bevelled or micro-beveled edges are what you'd expect and result in a 'v' between boards when they meet. They will still butt up neatly but does help give the boards more definition and in my opinion makes them look much more authentic (one of the big tell tail signs of laminate is the lack of v grooves). Only downside is that dirt can gather in these so the micro-bevel option can be the best of both worlds. Wood species is entirely a personal choice but do speak to supplies to check what you have in mind is suitable for the location in question. Different types of wood vary greatly in hardness, colour, environmental credentials and of course price! Finally (at last!) you get different grades or qualities of wood. 'Prime' or 'select' is often used to describe the best grades with the least filled knot holes or large variations within the wood. You then go down to 'natural' which will have some featuring but not much with 'rustic' having the most character and knot holes. None of these are necessarily bad choices. A prime standard would look silly in a very old tudor property whilst a 'rustic' finish in a sleek modern build could equally look strange. Anyway. Sorry for the mammoth post, I just know I was getting quite frustrated trying to not only understand all the options but also get a feeling for what was right for me. Hopefully this help you avoid the same problems!
...See More
Dilemma Help: What Is The Best Wood Flooring For Kitchens?
Q
Comments (2)
Hi Ocean Home Designs, There are many pro's and cons when installing a floor prior or after the kitchen. An advantage with fitting prior would be it makes life easier to fit a kitchen on top off, as the levels would be a lot easier to work from. Another benefit would be, the flooring will be easier/quicker to install with no kitchen obstructions to go around. On the other hand, some would rather not waste material by going under the units as the floor would just be covered over and never seen again, hence making a saving in material & fitting costs.
...See More

Sponsored

More Discussions

Thinking about switching rooms

6

Help reconfiguring the downstairs of my house

9

Dining room colour Scheme

4

Help to finish TV wall

5

media wall dilemma

2

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.