how to treat Corten steel to use as a kitchen splashback
Comments (12)
3 months agoCorten steel is a very unstable product. It turns a rusty brown with time, as you know, but the rust creates a dust that flakes a lot. I have a corten steel water bowl in my garden and it’s horrid. The water turns a rusty brown so you never have that lovely reflective water effect you see in photos. I probably wouldn’t use it indoors. You could cover it in glass but obviously an expensive option. I found this corten sealer which is a bit cheaper but no idea how affective it is.
3 months agoRelated Discussions
Splashback help!
Comments (53)Just to offer a different view point. Your floor tiles look amazing. Why not flow the idea through and use tiles of that ilk as your splashblack. We have just recently finished a kitchen with a similar feel and our client opted for patterned wall tiles as their splashback. Based on your comment about the floor being chosen to banish boredom If you are worried about carrying through more of the same tones and want to inject colour, you could always do this through your accessories, that way if you fancy a change.... The colour tones you have chosen provide a great canvas on which to complement or have fun with colour....See MoreHelp me choose kitchen worktops and possible splashback/tiles
Comments (13)Hi, I've now had quartz worktops fitted in a white with grey and mirror flecks (compact lactea) & attach photos. Cabinets are all done too. My next area is what to do for splashback behind the hob/under the extractor. I originally wanted to do red glass across the length of the wall, but we have had under unit lights fitted below the higher cabinets and at night I can change these to any colour I want. If I do red all across I won't get the effect of the lights. Not even sure red would go? The wooden chairs are going and will be replaced & I still need to choose my island lights (thinking 3 pendants hanging). Husband thinks stainless steel sheet behind hob. I'm not sure this will look right with dark glass hob under it & wonder if it is hard to look clean all the time. What ideas do you all have as you helped with the worktops. I also show the dining table and the new open lounge area (intend to put a rug down). We also still need to find wall lights....See MoreFed up of my glass splashback
Comments (7)Couple of ideas ... 1) cover with stainless steel splashback which is stick on so it can sit over your current one. Should be thinner styles that clad existing ones (or get someone to make you one) 2) attach a vinyl fablon over the glass which is wipeable/washable - the edge finish will depend on if you have anything adjacent to it ie wrap around or cut flush. You can get so many colours and patterns these days and it won’t be expensive to change if you don’t like it. A roll will probably cover it a few times if it gets too dirty but I used a white marble fablon as a worktop cover in my last house. Cost £10! 3) as mentioned- you can get a tile paint or even a glass paint. Try the fablon first though - I would ;0)...See MoreTiles, splashback, or another solution to tiling under a sloping sill?
Comments (18)The tiles will be covering the areas coloured light blue on this plan (the white and dark blue will be covered with panelling). Have narrowed it down to three tiles which will fit without too much faffing/cutting: Lucy - a 15x15 tile, though not sure if I should stick with one colour or do some kind of mix with the blues and white. https://www.wallsandfloors.co.uk/bathroom-tiles/lucy-tiles Rhian - a 10x30 tile. Again, it comes in a selection of blues and grays so I don't have to stick to the one colour. https://www.wallsandfloors.co.uk/rhian-30x10-tiles?product_colour=14%2C22#scroll-js Illumina - a 7.5x30 tile which also comes in blues and a gray. https://www.tonsoftiles.co.uk/illumina-wall-tiles/colour/blue-grey.html My current favourite is the Illumina as the finish looks lovely. I would have to apply the tiles vertically along the worktop by the sink though, as trimming 1-2cm off several 7.5 width tiles sounds like a recipe for lots of broken bits... Any thoughts on tile selection/orientation please? Had a play in Paint at some possibles....See More- 3 months ago
3 months ago
3 months ago- 3 months ago
- 3 months ago
3 months ago@Sonia off-topic Try the pond black dye, I add a couple of drops and get the beautiful reflection, that’s how the lily ponds get the mirror-like surface. I read a few years ago, they use it in water lily house in Kew as well. I add the dye in summer only, it looks amazing in the bright sun. That’s how it looks right now.
PRO3 months agoHi Claire,
We are with you the Corten steel effect is beautiful, but as suggested by the brilliant Houzz community it is a material that does need a level of maintenance to a degree:
There are however a few other options available to you:
- Glass Corten splashback: https://www.premierrange.co.uk/glass-splashback-printed-digital-images-made-to-measure?variation=Aged%20Copper&width=600&height=750&utm_term=&cq_src=google_ads&cq_cmp=20107909181&cq_term=&cq_plac=&cq_net=x&cq_plt=gp&gad_source=1
- Corten Customised options: https://halmanthompson.com/corten-steel-splashbacks/Professional Guidance (if you have the time, give them a call and understand the care guidance in advance, they will be able to provide you with a comprehensive level of guidance, without placing a order) The current guidance is below:
Another key quality of our Corten steel splashbacks is how easy they are to look after.Simply wipe down with a clean cloth and warm soapy water. That’s it.
No special cloths, no specific cleaning solutions, just soap and water. The lacquer protects the splashback from stains, so that’s all you’ll need.
Full care instructions will be provided with your order.
There are also paint effects available: Patina Craig and Rose - bear in mind your kitchen will be susceptible to steam, condensation e.t.c.
- https://craigandrose.com/products/artisan-copper-patina
- Etsy customised splashback stick tiles (as pictured below)
Warmest and best wishes
Team SPEAK
- 3 months ago
PRO7 days ago
MelFrance