skip to main content

What sort of lights for either side of the fireplace?

7 years ago

What sort of wall lights that you would suggest for either side of the fireplace - we want something that can go quite bright and them dim (we will be getting rid of the tall bookcase)??

Sort by:Oldest

Comments (2)

PRO
Karen Smuland Architect, LLC
7 years ago
how about recessed low-voltage wall wash lights in the ceiling to give you indirect ambient light? Its a great way to highlight artwork and mantels.
PRO
Ensoul Ltd
7 years ago
I would highlight two features; firstly, two adjustable low voltage down-lights in the ceiling to highlight the picture, secondly, two low voltage floor adjustable up-lights to accentuate the columns of the fireplace. Best regards, Mike Lander, Director, Ensoul
Related Discussions
What sort of porch please?
Q
Comments (9)
I disagree that a closed porch will spoil the house. If you are picky enough to get a match for the brick of the house then it will look lovely with your front door in it. I've seen many done badly with the wrong brick and many done well with the right brick. Of course you are lucky in that at the top of the house is cream coloured render, so you could if you wish mirror that effect if you don't want brick. The whole point of your porch is so that you have somewhere for your coats, so there's no point in an open design. Here's one we did locally, where there are lot of little two up two downs that need porches or you step straight into the lounge. We were picky with the bricks, copied the design over the windows and we think it turned out very well. The house is one of our rentals, therefore, we chose not to bother changing the front door for cost reasons, however, if we were selling or living there, then it would be a different matter, and we'd go for a lovely wooden door like yours. Before during After, wouldn't know it hadn't been there all the time!
...See More
double sided fireplace
Q
Comments (9)
Hi Diane, I think this has all gotten a little confused. Brandler the idea looks to be to remove the walls either side of the fireplace not to add alcoves. The new steel beam would be needed to pick up the floors and any walls above the removed walls. Maths Wife I don't think you are far off but the RSJ would be on the opposite side (over the existing wall), so where you have marked a false beam. The two options I can think to remedy the problem of the fireplace looking more within one room than the other are to extend the boxing around the new beam so that it comes to the front of the fireplace on both sides and so that both sides are even. This may not give the look you are after. So the other option is to form a false chimney breast in the room which will be sharing the fire. This will though set the fire deeper into the recess. Or as a bonus third option you could combine the two and come out with a false chimney a little into the second room and then extend the beam boxing almost to the front of the existing chimney breast. Good luck and let us all know how you get on. Ohh and as a shameless plug, which seems to upset some people, here is a double sided fire we designed on a previous project.
...See More
What sort of floor should I put in the kitchen?
Q
Comments (7)
All your suggestions sound great, so no help there! I do have porcelain tiles in my kitchen and they are really tough. I think “porcelain” makes people think of delicate tea sets, but it’s baked very hard and not at all delicate. I’ve had mine for 10 years and it’s so easy to look after - hoover and a quick mop. I’m very clumsy and always dropping things which smash into a million pieces when they land on the floor, but floor has always stayed intact. I’ve heard good things about LVT and I have laminate in my living room. It was a quick fix flooring but has fared really well so it’s staying!
...See More
Panelling either side of the fireplace (but asymmetrical walls)
Q
Comments (8)
Hi Daniel, what a great space! Looks like it's coming along nicely. Were you planning to do the panelling yourself or get a joiner in to complete this? Because the walls are different heights and widths it will just be a case of trying to cut it off at the best point, or only panelling up to a certain height to level out the difference. You could also leave a deliberate non-panelled border? If you're not 100% set on the panelling, what about using one alcove for a picture gallery and the other with simple floating shelves. Both make great use of the space (offering more storage with the shelves) and by using them for different things it hides the asymmetry. When they get used for the same purpose or have the same décor (such as the panelling) because they're different shapes, the comparison highlights the differences. Hope that's of some use!
...See More

Sponsored

More Discussions

Which layout do you think would look best for our renovation project?

5

Media wall bottom shelf.. logs? Ornaments?

7

Room Layout - Help please!

3

Does anyone know of a washer dryer that is less than 45cm deep?

5

Window and door colour/style help please

0

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.