which provider did you use to print the glass splashback?

Ennio Calzone

7 years ago

I'd like to get a glass splashback printed (different concept than yours) and I am looking for a good provider. Thanks

Gledhow Gardens, Kensington · More Info

Sort by:Oldest

Comment (1)

PRO
Glass Republic
7 years ago
Hi Ennio, did you manage to find what you were looking for? If not, I am sure we can help you achieve what ever you are after in terms of glass splashback design. Regards, Richard
Related Discussions
kitchen glass splashback with LED lights
Q
Comments (8)
LED is best from the top down if you can - as a few points of your looking through the glass down ward you will see the led strip little points - if on top of glass it you would most likely not see the hot point of light. The glass should most likely be coloured but a pastel colour or white using low iron glass as it will allow light to travel better. Lastly textured glass works better as it allows the light to hit a design and the effect is better (but i make textured splashbacks) Use low low glass paints a colour with top light led - that you can easily access if light goes or transformer etc. They will say it has a 10 year life span but I have seen many break and you will want to replace easy without taking your kitchen apart
...See More
Glass splash-back help
Q
Comments (16)
Hi Darren, Here are a some images showing some similar finishes you have specified. This is a FB colour on a plain glass - Manor House Grey This is antique bronze mirror below. The below also has the Antique bronze mirror as a large single panel on the wall and also fitted in the Island Niche. The below is FB Blackened - Nice and reflective, and matches the wall colour almost perfectly - looks great with the light and dark tones of the cabinets. This is a plain Bronze mirror - looking completely different to the Antique version. Finally I have one in a Dark Blue - I don't have a better image unfortunately. We did notice it did darken the niche area when it was installed a lot....this may be a contributing factor in your decision... Best of Luck, once you have decided, I'd love to see what you go with.
...See More
Splashback decision
Q
Comments (17)
We had granite worktop with upstand and no splashback in our previous house and I can honestly say it never bothered me; the painted walls were easy to wipe clean and even refresh with a bit of paint when some stain got stubborn (that happened only once!) The thought of grout in the kitchen terrifies me...! :)) We now have glass for splashback and I think it's the best! (I don't have any better pics of our old kitchen, at the time I wasn't into photographing interiors). My advice is not to go for tiles, just keep it simple and clean. Good luck!
...See More
Glass splashback and upstand dilemma
Q
Comments (10)
I do like Bushboard products.................the only draw back with the Vista range of splashbacks is that most of them are 9mm thick, which can pose problems when trying to put the faces back on your sockets, as the screws may not reach. It's one of those products, that if you were going to use it, like very thick tiles, then you need to sort out your back boxes to accommodate it. Glass is usually supplied in 4mm like a standard tile, which doesn't give you the knock on problem with the sockets. The long socket screws are only 75mm, so they will not reach if you stick a 9mm product on the wall with adhesive. 6 of their products:- Constellation, Hazy Forest, Inner City Cloud / Ocean Grey, Kaldeidescope Grey / Blue come in 4mm, suitable for a wall. Standard Acrylic sheeting ( from just about anywhere ) is orderable - ( is that a word?) from 3mm up, but of course, may not be suitable for behind a hob. However, we have this in our downstairs shower room, and it's great.
...See More

which provider did you use to print the glass splashback?

Comment (1)

Glass Republic

Related Discussions

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US