skip to main content

Hi, could you tell me where the x2tap basin & vanity unit is from?

3 years ago

Dean

Parke Rd, Barnes SW13 · More Info

Comment

Related Discussions
Basin too big?
Q
Comments (26)
Wow...there is a lot of chat about this sink...I see it as simple as ...change it and put the right one in....end of saga....I would not be bringing in another option of a basin in here ....the original on is causing enough commotion. As for the clear gluey stuff ...that is silicone and that comes off of the tiles without a problem but you want to make sure that the pedestal of the original basin is smaller than the new one or you could end up with it not covering the tile line that this one had.....stick with the original....then there is no cost to you ....change it and it will cost you I would think...I would also put a smaller mirror about the size of the inner mirror without the framed edge... as I said previously as I believe that it is overshadowing this basin and will look even bigger with a small basin. What I would do is to put a piece of paper up on the wall and make it the size of your mirror currently and see if you like the size and then drop the size of the paper and see which is better. Hope you get this sorted soon...it is your bathroom and you need to decide before you get even more suggestions... hope this helps
...See More
Five New Washbasins and The Bonfire of the 'Vanities' OR upcycle?
Q
Comments (32)
Hello Ro Ro, Just a little thought here.. you can create a whole range of storage that doesn't involve having something under the sink! Or you could have a back to wall floating unit.. Small and rectangular.. It does not have to look like they do now.. Also with certain taps you do need to look at the water pressure, if you want aerated taps etc.. If your taps have a good flow I am sure you won't have a problem.. :))
...See More
so I made a bathroom unit and mirror!
Q
Comments (42)
Just one thing that has come to mind, wood can expand and contract slightly so possibly better of bonding some metal flat bar (30mm or 40mm wide, you can get it in b&q) then the wooden frame onto that If you know a local metal fabrication place the could make you a frame from steel angle, mine is u section along the top for hanging and angle along the sides and bottom, I’d say you’d be fine with just the flat bar option above then the wood :-)
...See More
What colour would you paint these kitchen units?!
Q
Comments (35)
I'm in Northern Ireland and used Dee Light Furniture Facelifts NI. He has a Facebook page with lots of photos of his work showing lots of colours so its worth a look there. His standard of work is excellent and came highly recommended by word of mouth. He also builds this tear drop caravans to order! I think it was worth paying someone as he made our existing doors and drawers look brand new filling the holes from the old handles. We could never have done that to his standard
...See More

Sponsored

More Discussions

Proposed floor plan help please

39

Which layout do you think would look best for our renovation project?

5

How can I fit an induction hob in place of a range cooker?

5

Inserting a bathroom downstairs and adding a separate toilet

0

Garden vs Garage dilema. Please help!

3

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.